To manage and service the hotel channel video stream, remote onto the local network using one of the server room machines, and in a browser paste the ip address of your desired encoder. 


Encoder IP Addresses:

WEH: 10.0.139.142

NBB: 10.0.143.142

WEPB: 10.0.170.142

WEA: 10.0.110.142


Default username: Admin

Default password: pass


Once logged in navigate to the settings tab. Next select EC1. This will be the channel we are streaming the video on, as the encoder has two outputs. Please ensure the following settings are configured as outlined. All other settings can be disregarded

  • Pipelline control: Enable
  • Input Control: Video File with Transcode
  • Video File: Upload file here
  • Output Resolution: 1080p60
  • Output Video Encoding Format H.264/AVC
  • Overscan Adjustment: 0 for both
  • Output Video Bitrate: 6.0Mbps
  • Output Audio Encoding Format: AAC
  • Output Audio Bitrate 128Kbps
  • Outut Audio Gain: +1
  • Output Stream URL: RTP :// 224.100.1.1 : 50000
  • SRT Key Length: N/A
  • SRT Passphrase: N/A
  • MajorVirtual Channel Number: 1
  • Minor Virtual Channel Number: 1
  • Short Channle Name: N/A


Two ensure the second stream is disabled, select EC2. Once this menu is open set pipeline control to disabled. Leave all other settings as they are. 



Once video has been uploaded and settings have been adjusted select apply. Keep in mind the encoder may need time to upload the file (refresh webpage if still responsive after a few minutes, but give it a few minutes).


Video file size is limited to 512mb due to storage limitations on the blonder tongue.